www.vectorfog.com SAFETY PRECAUTIONS The battery charger is for AC 110V — 240V power supply/60Hz. Unplug the charger after the battery is fully charged (green light). Do not use any damaged power cord, plug, charger or socket. Do not touch the plug, charger or switch with wet hands. The charger is not waterproof.
www.vectorfog.com OPERATION FILLING THE TANK • Pre-mix the chemicals prior to filling the tank. • Fill the tank with chemical mixture through the solution inlet. • Close the cap of the tank securely to prevent chemical leakage. SOLUTION INLET REMARK The tank capacity is only 2 Liters.
www.vectorfog.com OPERATING THE UNIT Turn on the machine by sliding the switch to the ON position. Turn off the machine by sliding the swtich to the OFF position. Adjust the droplet size by turning the nozzle on the front of the machine.
Page 7
www.vectorfog.com CLEANING Clean the fogger after every use. This will prolong the life of the machine. CLEANUP OF WATER BASED LIQUIDS STEP A When fogging is complete, pour any liquid left in the tank to a suitable container using a funnel. Operate the fogger for one minute with the nozzle opened to the largest droplet size setting (anti clockwise).
www.vectorfog.com chlorine releasing chemicals (e.g. peroxides) and PRODUCT other acids should only be used with approved acid resistant equipment models. If not approved for acid resistance a Ph-value should be limited GUARANTEE from 4,5-8,5. After use, fog with some clean water for about 3 minutes to remove any chemicals still left in the system.
Need help?
Do you have a question about the DC20+ ULV FOGGER and is the answer not in the manual?
Questions and answers