Care And Maintenance; Product Data; Display Quality Declaration; Declaration Of Conformity - Siemens AL21 User Manual

Siemens al21: user guide
Hide thumbs Also See for AL21:
Table of Contents

Advertisement

Care and maintenance

Your phone has been designed and manufactured
to the highest of standards and should be treated
with great care. The suggestions below will help
you to enjoy your phone for many years.
• Protect your phone from moisture and humidity.
Precipitation, humidity and liquids contain min-
erals that will corrode electronic circuits. Never-
theless, should your phone become wet,
disconnect it immediately from the power supply
to avoid electric shock. Do not place your phone
(even to dry it) on/in a source of heat such as a
microwave oven, oven or radiator. The phone
may become overheated and possibly explode.
• Do not use or store the phone in dusty, dirty ar-
eas. Its moving parts may be damaged and the
casing may become deformed and discoloured.
• Do not store your phone in hot environments
(e.g. vehicle instrument panel in the summer).
High temperatures can shorten the life of elec-
tronic devices, damage batteries and warp or
melt certain plastics.
• Do not store your phone in cold environments.
When the phone warms up again (to its normal
ambient temperature), moisture can form inside
the phone, which may damage electronic circuit
boards.
• Do not drop, knock or shake your phone. Rough
handling can damage internal circuit boards!
• Do not use harsh chemicals, cleaning solvents,
or strong detergents to clean the phone!
The suggestions given above apply equally to your
phone, battery, charger and all accessories. If any
of these parts is not working properly, obtain fast
and reliable help at our service centres.

Battery quality statement

The capacity of your mobile phone battery will re-
duce each time it is charged/emptied. Storage at
too high or low temperatures will also result in a
gradual capacity loss. As a result the operating
time of your mobile phone may be considerably re-
duced, even after a full recharge of the battery.
Regardless of this, the battery has been designed
and manufactured so that it can be recharged and
used for six months after the purchase of you mobile
phone. After six months, if the battery is clearly suf-
fering from loss of performance, we recommend that
you replace it. Please buy only original batteries.

Display quality declaration

For technological reasons, a few small dots with
different colours may appear in the display in ex-
ceptional cases.
Just remember that the appearance of brighter or
darker dots generally does not mean that a fault
has occurred.

Product data

Declaration of conformity

BenQ Mobile hereby declares that the phone de-
scribed in this user guide is in compliance with the
essential requirements and other relevant provi-
sions of European Directive 1999/5/EC (R&TTE).
The relevant declaration of conformity (DoC) has
been signed. Please call the company hotline if you
require a copy of the original:
www.BenQMobile.com/conformity

Technical data

GSM class:
Frequency range:
GSM class:
Frequency range:
GSM class:
Frequency range:
Weight phone:
Size:
Li-ion battery:
Operating temperature: -10 °C... +55 °C
SIM card:
11
4 (2 watt)
880-960 MHz
1 (1 watt)
1710-1880 MHz
1 (1 watt)
1850-1990 MHz
77.7 g
86.8 x 45.8 x 19.2 mm
(66.2 ccm)
600 mAh
3.0 V or 1.8 V

Advertisement

Table of Contents
loading

This manual is also suitable for:

Al21 - siemens cell phone 1.5 mb

Table of Contents