Table of Contents
Advertisement
SAR
European Union (RTTE) and interna-
tional (ICNIRP)
INFORMATION ON RF EXPOSURE /
SPECIFIC ABSORPTION RATE (SAR)
THIS MODEL MEETS INTERNATIONAL
GUIDELINES FOR EXPOSURE TO RADIO
WAVES
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits
for exposure to radio waves recommended by
international guidelines. These guidelines were
developed by the independent scientific organ-
ization ICNIRP and include safety margins de-
signed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement
known as the Specific Absorption Rate, or
SAR. The SAR limit for mobile devices is
2 W/kg and was adopted into the European
Standard EN 50360 and into other national
standards. The CE mark demonstrates that the
EU requirements are met.
The highest SAR value for this device when
tested at the ear was 0.64 W/kg
devices offer a range of functions, they can be
used in positions other than the head, such as
directly on the body. In this case, the limits are
met too.
1 The tests are carried out in accordance with inter-
national guidelines for testing.
As SAR is measured utilizing the device's high-
est transmitting power, the actual SAR of this
device while operating is typically below that in-
dicated above. This is due to automatic chang-
es to the power level of the device to ensure it
only uses the minimum level required to reach
the network.
The World Health Organization has stated that
present scientific information does not indicate
the need for any special precautions for the use
of mobile devices. They note that if you never-
theless want to reduce your exposure then you
can do so by limiting the length of calls or using
a 'hands-free' device to keep the mobile phone
away from the head and body.
Additional Information can be found on the
websites of the World Health Organization
(www.who.int/emf) or BenQ Mobile
(www.siemens.com/mobilephones).
Guarantee certificate
(UK)
Without prejudice to any claim the user (custom-
er) may have in relation to the dealer or retailer,
the customer shall be granted a manufacturer's
1
. As mobile
Guarantee under the conditions set out below:
• In the case of new devices and their compo-
nents exhibiting defects resulting from man-
ufacturing and/or material faults within
24 months of purchase, BenQ Mobile shall,
at its own option and free of charge, either
replace the device with another device re-
12
flecting the current state of the art, or repair
the said device. In respect of parts subject
to wear and tear (including but not limited to,
batteries, keypads, casings, small parts on
casings, protective coverings where includ-
ed in the scope of delivery), this warranty
shall be valid for six months from the date of
purchase.
• This Guarantee shall be invalid if the device
defect is attributable to improper treatment
and/or failure to comply with information
contained in the user manuals.
• This Guarantee shall not apply to or extend
to services performed by the authorised
dealer or the customer themselves (e.g. in-
stallation, configuration, software down-
loads). User manuals and any software
supplied on a separate data medium shall
be excluded from the Guarantee.
• The purchase receipt, together with the
date of purchase, shall be required as evi-
dence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee default
becoming evident.
• Ownership of devices or components re-
placed by and returned to BenQ Mobile
shall vest in BenQ Mobile.
• This Guarantee shall apply to new devices
purchased in the European Union. For
Products sold in the United Kingdom the
Guarantee is issued by BenQ Mobile UK
Ltd., Carmelite 50, Victoria, Embankment,
London, EC4Y 0DX, U.K.
Advertisement
Table of Contents
