Table of Contents
Advertisement
Quick Links
10" Random Orbital Polisher/Buffer
Stock Number: W50054
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!
It is the owner and/or operator's responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and
instruction manual prior to operation of this random orbital buffer. The owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and while in use, maintaining the unit in good
working order. If the owner and/or operator are not fluent in English, the product warnings and instructions shall be read and discussed with the opera-
tor's native language by the purchaser/owner or his designee. Make sure that the operator comprehends its contents. Safety information shall be
emphasized and understood prior to usage. The random orbital buffer shall be inspected per the operating instructions.
Users of this random orbital buffer must fully understand these instructions. Each person operating this random orbital buffer must also be of sound
mind and body and must not be under the influence of any substance that might impair their vision, dexterity, or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at: 1-800-426-1262 (Pacific Time) 6:00 am to 4:30 pm
Monday - Friday
NOTICE: READ BEFORE USING
Most automotive finishes require a softer, plusher buffer bonnet than the terry cloth bonnet provided with this product. Use the clean terry cloth bonnet
provided with this product to apply wax and related chemicals only, do not use it again to remove wax or buff a waxed surface even though it has been
washed. Otherwise, paint damage may occur. Use the clean synthetic wool bonnet to buff waxed finishes. Wilmar Corporation, her successors,
assigns and insurers will not be responsible for damage as a result of failure to heed this notice.
OWNER'S MANUAL
FOR YOUR SAFETY,
please read these instructions carefully and retain them for future use.
®
C
US
LISTED
E242023
14 PU
Advertisement
Table of Contents
Related Manuals for Performance Tool PTW50054
Summary of Contents for Performance Tool PTW50054
- Page 1 10" Random Orbital Polisher/Buffer Stock Number: W50054 OWNER'S MANUAL ® LISTED E242023 14 PU READ ALL INSTRUCTIONS BEFORE USING THIS TOOL! It is the owner and/or operator’s responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this random orbital buffer.
-
Page 2: Table Of Contents
INTRODUCTION The Performance Tool 10” Random Orbital Buffer is designed for polishing, waxing, and buffing. Powered by a durable 0.92 Amp motor, the random orbiting mechanism delivers 3,000 operations per minute (OPM), mimicking the motion of circular hand polishing. Dual hand grips provide added control. -
Page 3: Safety Warnings
UNPACKING & INSPECTION CONTINUED Please have the serial number, model number, and date of purchase available for reference when calling. MODEL NUMBER: ______________________________________ SERIAL NUMBER: _______________________________________ DATE of PURCHASE: ____________________________________ SAFETY WARNINGS READ ALL SAFETY WARNINGS BEFORE USING POLISHER/BUFFER WARNING Some dust created by spraying, blowing, power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. -
Page 4: Tool Use & Care
PERSONAL SAFETY, continued 5. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unex pected situations. 6. Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. -
Page 5: Random Orbital Buffer Features
APPLICATIONS The Performance Tool Random Orbital Buffer can be used to polish and buff most high-gloss surfaces. The terrycloth application bon- net and synthetic wool buffing bonnet are manufactured to apply and remove polishes and waxes. Common applications include: cars, boats, aircraft, hardwood floors, furniture and more. - Page 6 Never use any type of abrasive cleaner as it may damage or scratch the surface. BONNET INFORMATION & CARE The Performance Tool Random Orbital Buffer is supplied with two (2) bonnets: 1. Terrycloth bonnet - used to apply wax / polish onto the surface.
-
Page 7: Care & Maintenance
CARE & MAINTENANCE WARNING Always be sure that the tool is switched off and has been disconnected from the power source before making any adjustments or per- forming any maintenance procedures. 1. Use only mild soap and a damp cloth to clean orbital buffer. DO NOT immerse any part in liquid. 2. -
Page 8: Warranty Information
ONE YEAR LIMITED WARRANTY – WILMAR CORPORATION POWER TOOLS Wilmar Corporation (hereinafter “seller”) warrants to the original purchaser only, that this product will be free from defects in material or workmanship for a period of one year from date of purchase for home domestic use. Warranty Performance Warranty coverage is conditioned upon purchaser furnishing seller or its authorized service center with adequate written proof of the original pur- chase date.
Need help?
Do you have a question about the PTW50054 and is the answer not in the manual?
Questions and answers