Download Print this page
Performance Tool M574DB Owner's Manual

Performance Tool M574DB Owner's Manual

Dual piston straight line sander

Advertisement

Quick Links

Dual Piston Straight Line Sander
Stock Number M574DB
OWNER'S MANUAL
SPECIFICATIONS:
Pad size (IN.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.75 x 16.75
Air pressure (P.S.I.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Average air consumption (C.F.M.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Free speed (R.P.M.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,500
Air inlet (N.P.T.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4
Hose size (I.D.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8 in.
Length (IN.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.1
Weight (LBS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.64
Specifications are subject to change without notice.
WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE
OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY
AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
Some dust created by power sanding contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. An example of
this type of chemical is lead from lead based paints. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your expo-
sure: work in a well ventilated area and work with approved safety equipment, such as dusk masks that are specially designed to filter out microscopic particles.
P.O. Box 88259 Tukwila, WA 98138 • 1-800-497-0552 • www.wilmarcorp.com • Made in China • © Copyright 2010

Advertisement

loading
Need help?

Need help?

Do you have a question about the M574DB and is the answer not in the manual?

Questions and answers

Summary of Contents for Performance Tool M574DB

  • Page 1 Dual Piston Straight Line Sander Stock Number M574DB OWNER’S MANUAL SPECIFICATIONS: Pad size (IN.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.75 x 16.75 Air pressure (P.S.I.) .
  • Page 2 IMPORTANT SAFETY INFORMATION WARNING! READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY. 1. Keep work area clean. Cluttered areas invite injuries. 2.
  • Page 3 Only use accessories intended for use with this tool. Approved accessories are available from Performance Tool®. Use only accessories that are 4. Lubricate the air motor with a good grade of air tool oil and drain the tank daily. Grit or recommended by the manufacturer for your model.
  • Page 4 Flat Gear Locking Nut Rivet Slide Gear PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its products. Piston Brass Plate Piston Ring Screw Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL®...