Performance Tool W50087 Owner's Manual
  1. Manuals
  2. Brands
  3. Performance Tool Manuals
  4. Sander
  5. W50087
  6. Owner's manual

Performance Tool W50087 Owner's Manual

6" random orbital polisher/sander
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
6" RANDOM ORBITAL
POLISHER/SANDER
Item Number W50087
WARNING
It is the owner and/or operators' responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operation of this product.
The owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning
labels and while in use, maintaining the unit in good working order. If the owner and/or operator are
not fluent in English, the product warnings and instructions shall be read and discussed with the
operators' native language by the purchaser/owner or his designee. Make sure that the operator
comprehends its contents. Safety information shall be emphasized and understood prior to usage.
The product shall be inspected per the operating instructions.
Users of this product must fully understand these instructions. Each person operating this product
must also be of sound mind and body and must not be under the influence of any substance that
might impair their vision, dexterity or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
Please read these instructions carefully and retain them for future use.
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W50087 and is the answer not in the manual?

Questions and answers

Related Manuals for Performance Tool W50087

Summary of Contents for Performance Tool W50087

  • Page 1 6" RANDOM ORBITAL POLISHER/SANDER Item Number W50087 OWNER’S MANUAL WARNING It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this product. The owner/operator shall retain product instructions for future reference.

  • Page 2: Safety Guidelines - Definitions

    SAFETY GUIDELINES / DEFINITIONS This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information available at the time of publication. The manufacturer reserves the right to make product changes at any time without notice.

  • Page 3: Important Safety Information

    If unreadable or missing, contact and pull the power tool out of your control. Keep proper footing Performance Tool® for a replacement. and balance at all times. Do not overreach, especially on 23. Disconnect the plug from the power source before making ladders.
  • Page 4 IMPORTANT SAFETY INFORMATION 34. Do not use a damaged accessory. Before each use inspect kickback or torque reaction during start-up. The operator can the accessory such as abrasive wheels for chips and cracks, control torque reactions or kickback forces, if proper precau- backing pad for cracks, tear or excess wear, wire brush for tions are taken.
  • Page 5 GROUNDING WARNING: TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged.

  • Page 6: Symbol Definitions

    GROUNDING 5. If you are using one extension cord for more than 7. Make sure the extension cord is properly wired one tool, add the nameplate amperes and use the and in good electrical condition. Always replace a damaged extension cord or have it repaired by a sum to determine the required minimum cord size.

  • Page 7: Operation

    4) for polishing. Otherwise, dam- up or use of this product. age may occur to the paint being polished. Performance Tool® is not responsible INSTALLING THE BACKING for damage to the vehicle’s finish due to PAD/FOAM PAD improper use of this Polisher/Sander.
  • Page 8 OPERATION 8. Begin using the Polisher/Sander to apply surface of the vehicle. Failure to do so may wax to the vehicle. Apply the wax to result in the Bonnet being thrown from the all flat surfaces with broad, sweeping Backing Pad. strokes in a crisscross pattern.

  • Page 9: Care And Maintenance

    CARE & MAINTENANCE NOTICE Procedures not specifically ex- 7. Use only a clean cloth and mild plained in this manual must be performed detergent to clean the body of the only by a qualified technician. Polisher. Do not use solvents. Do not immerse any part of the tool in liquid.

  • Page 10: Troubleshooting

    TROUBLESHOOTING Problem Possible Causes Likely Solutions 1. Check that cord is plugged in. 2. Check power at outlet. If outlet 1. Cord not connected. has no power, turn off tool and 2. No power at outlet. check circuit breaker. If breaker Tool will not start.
  • Page 11 After 90 days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts which our examination shall disclose to be defective and under warranty.

  • Page 12: Parts Diagram

    PARTS DIAGRAM Part Description Part Description Part Description Gearbox Cover Housing Face Gear Gearbox Cap Screw Carbon Brush Gearbox Cap Screw Screw Carbon Brush Holder Woodruff Key Screw Speed Control Gearbox Switch Spindle Lock Nut Spring Bearing Pinion Gear Internal Switch Shroud Bearing Clamp Screw...

Table of Contents