Sherwood NewCastle R-945 User Manual page 24

Entering video labels
This function can be operated only on video input
sources such as DVD, LDP, VCR 1 and AUX/TV.
Select the desired video input source to
enter its label.
1
Press the VIDEO LABELS
button for more than 2
2
seconds.
Select the first character of the video label
while the digit is flickering.
3
Each time the INPUT SELECTOR/INDEX knob is
rotated, the characters changes as follows ;
26 Capital Letters : A B C D E F G H I J K L M N O P
Q R S T U V W X Y Z
10 Arabic Numerals : 1 2 3 4 5 6 7 8 9 0
9 Special Marks :
Memorize it within
6 seconds.
4
If the MEMORY/ENTER button is pressed for more
than 2 seconds on the character, a dot( ) will appear
by the character.
If the MEMORY/ENTER button is pressed without
selecting the desired character, the digit will be blank.
If 6 seconds elapses, repeat again from the step 2.
Repeat steps 3 and 4 to memorize the rest
of up to 8 characters.
5
Note:All 9 charcters must be memorized.
Rectifying or clearing a video label
Select the desired video input source to be
rectified or cleared.
1
Repeat the steps 2~5 in "Entering video
labels" procedure.
2
To clear a video label, make a blank on each digit,
then the video label is cleared and its factory video
input source will be displayed.
25