Picture Setting - JVC LT-22E53B Instruction Manual

5. If the TV detects the latest firmware, the Over Air Download screen
buttons to select Yes / No for the upgrade
will appear. Press the
procedure.
6. If you select Yes, the over air download will start. Press the EXIT button if
you want to stop the download and exit the menu.
During download, please do not turn off or unplug your TV.
7. When the download is complete, the TV will automatically upgrade the
software.
8. When the update is complete, the TV will return to standby mode.
9. Press the button on the right side panel of the TV or on the remote control
to switch on the TV.
If you encounter problems after the software update, we recommend that you restore your TV to the factory default
settings. To do this, follow the steps below:
1. Press the MENU button to go to the MAIN menu. Press the
button.
buttons to select Restore Factory Default and then press the OK button. Press the
2. Press the
Yes to reset the setting.
3. The TV will restore all settings and go to the First Time Installation. Follow the First Time Installation steps (refer to
page 17-19 for details).

Picture Setting

Allows you to set your preferred picture mode.
1. Press the MENU button and then press the
PICTURE menu and then press the OK button.
2. Press the buttons to select the following picture options and then
press the OK button.
buttons to select OPTION and then press the OK
buttons to select the
Customising TV Settings
New FW is available for upgrading
TV Version V0.01
Stream Version v0.03
Yes to upgrade.
No to ignore this upgrade.
Yes No
Download
20%
EXIT
Software Update(OAD)
71%
button to select
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Picture Mode
Colour Temperature
Aspect Ratio
Noise Reduction
PICTURE
Screen
Backlight
5
GB
Standard
Medium
Auto
Middle
6
29