Schedule Mode - Sharp YO-270 Operation Manual

g Schedule Mode
Entry
<Example>
A project meeting will be held from 10:00 AM to 11:00 AM on
Setember 11, 2002
1. Press g to enter the

Schedule Mode.

The Schedule Search window
will appear.
The current date will be displayed and the cursor under the first
number flashes.
The first number depends on your Date Format selection. These
examples are in the MM/DD/YYYY format.
2. Press n. The Schedule
Entry display will appear and
Date will be highlighted. Enter
09 for month.
3. Move the cursor to the day/year field by using j or l and enter the
target day/year in the same
manner.
4. Press x, and enter 10:00
for Start Time.
Schedule
Search Date?
0 _ 8-08-2002
Date 09-11-2002
Start Time 9:00 AM
End Time 9:00 AM
Alarm Yes
Reminder 0 Min. Before
Date SEP 11,2002
Start Time Start Time 10:00 _
End Time End Time 9:00 AM
Alarm Yes
Reminder 0 Min. Before
5. Press x.
"End Time" will be highlighted
and the time will automatically
change to 30 minutes after the
Start Time.
6. Enter 11:00 for End time, and
press x.
7. Press j or l to select "Yes" or
"No" for Alarm setting, and
press x.
If you select "Yes", the Schedule
Alarm will sound at the time set in Reminder minutes before the
Start time. If you select "No", Schedule Alarm will not sound.
Note:
• If you select "No" in step 7,
"Description" will appear instead.
Go step 9 to continue.
8. Enter the appropriate time for
Reminder and press x.
Schedule Alarm will sound at
the entered time before the
Start Time. You can select any
number from 00 to 99.
Note:
• Enter the number in two-digit format
Date SEP 11,2002
Start Time 10:00 AM
End Time 10 _ :30
Alarm Yes
Reminder 0 Min. Before
Date SEP 11,2002
10:00 AM
Start Time
End Time 11:00 _
Alarm Yes
Reminder 0 Min. Before
Date SEP 11,2002
Start Time 10:00 AM
End Time 11:00 AM
Alarm Yes
Reminder 0 Min. Before
Date SEP 11,2002
Start Time 10:00 AM
End Time 11:00 AM
Alarm No
Reminder – – – – –
Date SEP 11,2002
Start Time 10:00 AM
End Time 11:00 AM
Alarm Yes
Reminder 05 _ Min Before
13