Kenmore Trio 795.7973 Series Use & Care Manual page 10

HOW TO REPLACE DOOR HANDLES
NOTE: Handle appearance may vary from
illustrations on this page.
1. Replacing Refrigerator Door Handle
• Place the handle on the door by adjusting handle
footprints to fit mounting fastners and tighten the
set screws with a 3/32" (2.5mm) Allen wrench.
NOTE: If the handle mounting fasteners need to be
tightened or removed use a 1/4" Allen wrench.
2. Replacing Freezer Drawer Handle
• Place the handle on the door by adjusting handle
footprints to fit mounting fastners and tighten the
set screws on the bottom of the handle with a
3/32" (2.5mm) Allen wrench.
NOTE: If the handle mounting fasteners need to be
tightened or removed use a 1/4" Allen wrench.
All manuals and user guides at all-guides.com
REFRIGERATOR INSTALLATION
10
Mounting
Fasteners