Connecting A Wireless Client; Wps Button - D-Link DIR-516 User Manual

Section 3 - Connecting a Wireless Client

Connecting a Wireless Client

The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Many wireless
devices will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-516 router. Please
refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS on it.
Step 1 - Press the WPS button on the DIR-516 for about 1 second.
The WPS button will start to blink.
Step 2 - Within 2 minutes, press the WPS button on your wireless
client (or launch the software utility and start the WPS
process).
Step 3 - Allow up to 1 minute for the devices to configure your
connection. Once the WPS light stops blinking, you
will be connected and your wireless connection will be
secure with WPA2.
D-Link DIR-516 User Manual

WPS Button

44