Advertisement
ENGLISH
SP®2P
The Peavey® SP®2P is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of
performance in a compact powered loudspeaker. This two-way powered system is comprised of a 1000 W peak
switching power amplifier driving a 15" Black Widow® BWX series woofer, now with a long throw voice coil.
The 2" RX™22CT titanium diaphragm compression driver is driven by a 500 W peak switching power amplifier,
and is coupled to a low coloration waveguide with a coverage pattern of 100° horizontal by 50° vertical.
The SP®2P is capable of up to 130 dB peak SPL. The enclosure is constructed of plywood augmented with inter-
nal braces, covered with a textured black painted finish. The shape is a modified-trapezoidal form, with a full-
length coated perforated steel grille, to offer an attractive yet durable powered speaker system. A pair of four-way
inset handles, one on each side, provide convenient transport and handling. The cabinet and grille are black.
Two independent mixed input channels each offer a balanced input to the preamp/EQ electronics, and a level
control. Each channel has one combo female XLR and 1/4" TRS phone jack. It is switchable between mic-level
and line-level sensitivity. Channel 2 has a 3.5 mm media jack added. A line out section has male XLR connec-
tors. The Thru outputs allow linking of additional speaker systems, or feed of the signal to a powered subwoofer,
etc.
The power amplifiers providing the bi-amplification are low-distortion switching units providing 1000 W peak
available power into the nominal 4 ohm load of the woofer, and a 500 W peak available power into the nominal 8
ohm load of the tweeter. The power supply for both amps is a switch mode type for low weight and high efficien-
cy. Both amplifiers feature our DDT™ compression, which virtually eliminates audible power amplifier clipping.
Cooling is via forced air circulation. A four-way handle on each side provides ease of transport, while multiple
fly points are provided to allow overhead rigging.
The combination of the Black Widow® BWX woofer with the RX™22CT tweeter and DSP crossover and EQ pro-
vide a clarity and impact beyond conventional powered enclosures. The switching power amps and switch-mode
power supply, along with the professional grade speaker components, provide this high level of technological
sophistication at a very light weight, while at a very reasonable cost.
* BI-AMPLIFIED POWERED SPEAKER SYSTEM
* 1000 WATTS PEAK AVAILABLE WOOFER POWER, 500 WATTS PEAK AVAILABLE TWEETER POWER
* BOTH POWER AMPS HAVE DDT COMPRESSION
* 15" BLACK WIDOW® BWX WOOFER
* PEAVEY RX™22CT COMPRESSION DRIVER TWEETER ON A QUADRATIC THROAT WAVEGUIDE
* PEAK SPL UP TO 130 DB WITH MUSIC!
* DSP BASED CROSSOVER, LIMITING AND EQ
* EQ PRESETS AVAILABLE VIA ROTARY ENCODER PUSHBUTTON SELECT
* 9-BAND EQ AND OTHER SYSTEM SETTINGS ACCESSED VIA ROTARY ENCODER PUSHBUTTON SELECT
* DYNAMIC BASS BOOST FUNCTION
* UP TO 150 MS OF ARCHITECTURAL DELAY
* FAN COOLED FOR MAXIMUM RELIABILITY
* TWO INDEPENDENT MIXED INPUT CHANNELS, WITH GAIN CONTROL AND MIC/LINE GAIN SWITCH
* EACH CHANNEL FEATURES A COMBO JACK WITH 1/4" TRS & FEMALE XLR BALANCED INPUT
Advertisement
