Advertisement
Floor Monitor
Program EQ: Displays current EQ selection (EDM preset is the default on 1st time power up)
(Presets)
EDM, Voice, Rock, DJ...etc
The program EQ selection is applied to the Graphic Equalizer and Bass enhancer.
"Custom" is displayed if GEQ has been adjusted by the user.
The last preset used, including a Custom one, is what will load the next time the SP®2P is powered
up.
Note: If input source is from the SP Sub High-Pass Processed output, then the screen will display:
Bass enhancement:
Delay:
Graphic EQ: Current settings 9 Bands +/- 12 dB at ISO octave centers (63Hz to 16 kHz)
Note: In SP®2P if input source is SP Sub, then Display:
Press the encoder to enter the screen to adjust the GEQ. Turning the encoder selects the frequency band to be
adjusted. Press the encoder to adjust that band. Pressing the encoder again returns to the band select mode. To
exit to the main menu, turn the encoder past the 16 kHz band to the X and Exit will appear. Press the encoder to
exit.
Speaker Polarity:
Normal (Default Selection)
Inverted
Power amp Level meter display:
The input signal to the two power amplifiers will be displayed in horizontal VU format. The Limit status of
each channel is also displayed.
Temperature: The temperature of the amplifier is monitored and display as long as it is in a safe operating range.
If the temperature gets too high, it goes into protect mode which is displayed here and on the main Input Level
screen.
Front LED:
Set LED operation to: On/DDT, Signal/DDT, or Off.
When On/DDT indication is selected, the LED is lit blue whenever the amplifiers are not shut
down.
When Signal/DDT indication is selected, the LED is lit blue whenever there is an input signal
present.
When Off indication is selected, the LED is not lit under any conditions.
"EQ Bypassed"
"Use EQ in SP Sub"
Off or On.
Current delay time
Adjust screen 0 to 150 msec also Feet and Meters
Note: In SP®2P if input source is SP Sub, then Display:
"Delay Bypassed"
"Set DLY in Sub"
"EQ Bypassed"
"Use EQ in SP Sub"
Advertisement
