Bartec PBTC-200-E Operation And Installation Manual page 24

Operation and Installation Manual PBTC-200-E
 Make sure that all bus wires are intact and not nicked or
damaged.
CAUTION
The silicone adhesive may cause irritation to skin and
eyes. Avoid eye contact. Avoid repeated or prolonged
skin contact. In case of contact with eyes, rinse with
water and seek medical advice.

Put silicone adhesive onto the exposed heating ele-
ment and insulation jacket.
21-54C3-7D0001/A Notice: Technical data subject to change without notice.
05/2023-EHT-441168 No claims for damage arising from alternations, errors or misprints shall be allowed.
 Thread the silicone pants onto the bus wires
 You might add further silicone adhesive to ensure optimal
sealing.
 Slide the silicone pants all the way onto the heating ele-
ment.
18
19
20
Page 22 / 40