Table of Contents
Advertisement
3
INSTALLATION
3.1 Safety and transport
! Module damage may occur!
NOTE
Never lift or move the module with the connection
Ä
cables or junction box.
Ä
Carry modules upright and horizontally as
shown.
NOTE
! Module damage may occur!
Do not drop modules.
Ä
! Module damage may occur!
NOTE
Ä
Do not stack modules.
12
INSTALLATION AND OPERATION MANUAL SOLAR MODULES GENERATION 4 (G4) – HANWHA Q CELLS – NA
! Module damage may occur!
NOTE
Never step on modules.
Ä
Ä
Do not subject modules to any mechanical
stress.
Ä
Do not allow any objects to fall onto modules
! Module damage may occur!
NOTE
Ä
Only make modifications to the module which have
been confirmed in writing by Q CELLS.
confirmation
letter
! Module damage may occur!
NOTE
Ä
Do not install modules near flammable
gas / vapors.
Do not install modules in close proximity to air
Ä
conditioning systems.
3
INSTALLATION
3.2 Preparation of installation
! Risk of fatal injury due to electric shock!
DANGER
Block off the installation zone.
Ä
Ä
Keep children and unauthorized individuals away
from the solar power system.
DANGER
! Risk of fatal injury due to electric shock!
Only use dry, insulated tools.
Ä
! Risk of fatal injury due to electric shock!
DANGER
Ä
Ensure that modules and tools are not subject to
moisture or rain at any time during installation.
INSTALLATION AND OPERATION MANUAL SOLAR MODULES GENERATION 4 (G4) – HANWHA Q CELLS – NA
! Risk of injury due to falling modules!
WARNING
Secure modules during installation.
Ä
Ä
Do not install modules in windy or wet weather.
Ä
Do not carry out the installation alone.
•
Only install undamaged modules and
components.
Ä
Do not modify the module (e.g. do not drill any
additional holes).
13
Advertisement
Table of Contents
