Related Manuals for Q CELLS Q.PEAK DUO-G7 Series
Summary of Contents for Q CELLS Q.PEAK DUO-G7 Series
- Page 1 INSTALLATION AND OPERATION MANUAL Q.PEAK DUO-G7.X solar module series Valid for North America...
-
Page 2: Table Of Contents
Intended Use governing the planning, installation, and operation of solar 4.3 CONNECTION OF MODULES This manual is valid in North America for Q CELLS solar modules. power systems and work on roofs. These instructions contain information regarding the safe handling •... -
Page 3: Introduction
Width [in] 39.4 (1000 mm) 39.4 (1000 mm) 39.4 (1000 mm) 39.4 (1000 mm) Q CELLS assumes no liability on the basis of these instructions. Frame height [in] 1.26 (32 mm) 1.26 (32 mm) 1.26 (32 mm) 1.26 (32 mm) Q CELLS is only liable in the context of contractual agreements Area [yd²]... -
Page 4: Requirements
Forces acting on the module are relayed to the mounting sub- Fig. 3: Installation options for crystalline Q CELLS modules. All dimensions are given in inch (mm in brackets). Also observe Please note the following guidelines that apply to the installation site: structure. -
Page 5: Electrical Layout
The loads in the table are related to the mechanical stability of the solar modules. The mechanical stability of the mounting system including clamps has to be evaluated by the system supplier. The listed test load values for Q CELLS were determined with the following clamp parameters: clamp width = 1.58 in (40 mm) and clamp depth = 0.39 in (10 mm). -
Page 6: Installation
/ vapors. The packaging is not weatherproof. Ä Do not install modules in close proximity to air conditioning systems. INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO-G7.X – Q CELLS INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO-G7.X – Q CELLS... -
Page 7: Preparation Of Installation
Do not modify the module (e.g. do not drill any see Fig. 3, p. 7. moisture or rain at any time during installation. additional holes). INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO-G7.X – Q CELLS INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO-G7.X – Q CELLS... -
Page 8: Electrical Connection
Only use dry, insulated tools for electrical work. Insulate any exposed cable ends. Ä Only connect cables with plugs. INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO-G7.X – Q CELLS INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO-G7.X – Q CELLS... -
Page 9: Connection Of Modules
Inverter click 180° 180° INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO-G7.X – Q CELLS INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO-G7.X – Q CELLS... -
Page 10: Grounding
DANGER! In order to prevent electrical shock or fire, the frame of the module The Q CELLS modules can be bonded with the racking system Risk of fatal injury due to electric shock! as well as any non-current-carrying metal parts of the system must using UL1703 or UL2703 certified integrated grounding methods. -
Page 11: Maintenance And Cleaning
MAINTENANCE AND CLEANING Q CELLS solar modules are known for a long operating life and NOTE! Module damage may occur! minimal maintenance effort and expense. Dirt and grime are usually Ä Do not clean modules with water if there is a risk of washed away by rain. - Page 12 HANWHA Q CELLS AMERICA INC. 400 Spectrum Center Drive Suite 1400 Irvine, CA 92618 +1 949 748 59 69 EMAIL inquiry@us.q-cells.com www.q-cells.us Subject to change without notice. © Q CELLS Installation manual solar modules Q.PEAK DUO-G7.X_2020-09_Rev03_NA...
Need help?
Do you have a question about the Q.PEAK DUO-G7 Series and is the answer not in the manual?
Questions and answers