3M Aqua-Pure 3MFF100 Installation And Operating Instructions Manual

3M Aqua-Pure 3MFF100 Installation And Operating Instructions Manual

Full flow drinking water system

Advertisement

Quick Links

Installation and Operating Instructions For
3MFF100
Full Flow Drinking Water System
System tested and Certified by NSF
International against NSF/ANSI Standard 42
and 53 and CSA B483.1 for the reduction of
the claims specified on the Performance Data
Sheet.
Installer: Please leave manual with homeowner.
Homeowner: Please retain for operation and
future maintenance instructions.
This product is certified by the
Water Quality Association to
WQA S-803 for Sustainability
Attributes.

Advertisement

Table of Contents
loading

Summary of Contents for 3M Aqua-Pure 3MFF100

  • Page 1 Installation and Operating Instructions For 3MFF100 Full Flow Drinking Water System System tested and Certified by NSF This product is certified by the International against NSF/ANSI Standard 42 Water Quality Association to and 53 and CSA B483.1 for the reduction of WQA S-803 for Sustainability the claims specified on the Performance Data Attributes.
  • Page 3 System Model 3MFF100. Retain these instructions for future reference. Intended use: The 3M Brand 3MFF100 Drinking Water System filters drinking water at your faucet tap, also known as a point-of-use system. The systems are designed to be installed under a...
  • Page 4: Important Notes

    For Performance Data Sheet go to 3M.com/waterquality or contact 3M at 1-866-990-9785. For additional product information, including product manual and spec sheets, contact 3M at 1-866-990-9785.
  • Page 5: Important Installation Instructions

    Parts and Materials Required for 3MFF100 Undersink Installation (Included): 1. Filter Head Assembly 2. Filter Items Required (not included): • Adjustable wrench • Cordless drill • Phillips head screwdriver • Razor knife or tube cutter • PTFE Tape • Additional installation parts will be required (3/8"...
  • Page 6: Filter Replacement Instructions

    7. Determine length of 3/8" tubing (not included) required from filter head outlet to faucet adapter by holding tubing in place ensuring it is of appropriate length. Do not kink tubing as this will impede water flow. If necessary, loop tubing around to avoid it being kinked. Cut tubing straight with a razor knife.
  • Page 7 Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.
  • Page 8 3M Purification Inc. 3M Separation and Purification Sciences Division 400 Research Parkway 3M is a trademark of 3M Company. Meriden, CT 06540 NSF is a trademark of NSF International. WQA is a trademark of Water Quality Association. Phone 1-866-990-9785 Please recycle. Printed in USA.

Table of Contents