Advertisement
Installation and Operating Instructions For
3MFF100
Full Flow Drinking Water System
System tested and Certified by NSF International
against NSF/ANSI Standard 42 and 53 and CSA
B483.1 for the reduction of the claims specified on
the Performance Data Sheet.
Installer: Please leave manual with homeowner.
Homeowner: Please retain for operation and
future maintenance instructions.
Register your product at
www.aquapure.com/registermyproduct
or mail in the product registration card
included in this package
Advertisement
Table of Contents
Related Manuals for 3M Aqua-Pure 3MFF100
Summary of Contents for 3M Aqua-Pure 3MFF100
- Page 1 Installation and Operating Instructions For 3MFF100 Full Flow Drinking Water System System tested and Certified by NSF International against NSF/ANSI Standard 42 and 53 and CSA B483.1 for the reduction of the claims specified on the Performance Data Sheet. Installer: Please leave manual with homeowner. Register your product at Homeowner: Please retain for operation and www.aquapure.com/registermyproduct...
-
Page 3: Explanation Of Signal Word Consequences
Intended use: The 3M™ Aqua-Pure™ 3MFF100 Full Flow Drinking Water System is intended for use in filtering potable water in homes and has not been evaluated for other uses. The product is installed at the point of use and must be installed as specified in the installation instruction by a qualified professional. -
Page 4: Important Notes
NOTICE • Where a booster pump is installed on a water system, you MUST install an appropriate pressure regulating valve and regulate water pressure to <80psi. Contact a plumbing professional if you are uncertain how select/install/ maintain a pressure regulating valve. •... -
Page 5: Important Installation Instructions
IMPORTANT INSTALLATION INSTRUCTIONS The following installation instructions described are based on copper plumbing with 3/8” compression fittings. Additional fittings may be required to connect to cold water supply. 1. Open faucet and turn off cold water supply to relieve pressure. 2. -
Page 6: Filter Replacement Instructions
12. Align lugs of filter with head assembly and insert filter into head assembly. Turn filter to the right (clockwise) until it stops (about 1/4 turn). The filter is now installed. (See Figure 6) OUTLET 13.Turn on cold water supply valve and open faucet to flush INLET air from the system. - Page 7 Warranty, Limited Remedy, and Disclaimer: 3M warrants that this product will be free from defects in material and manufacture for the period of one (1) year from the date of purchase. No warranty is given as to the service life of any filter cartridge or membrane as it will vary with local water conditions and water consumption.
- Page 8 M Purification Inc. 400 Research Parkway Meriden, CT 06450, U.S.A. 3M and Aqua-Pure are trademarks of 3M Company. Tel 800.222.7880 NSF is a trademark of NSF International. 203.237.5541 © 2015 3M Company. All rights reserved. Fax 203.238.8701 34-8717-3305-0 www.aquapure.com Please recycle. Printed in U.S.A.
Need help?
Do you have a question about the Aqua-Pure 3MFF100 and is the answer not in the manual?
Questions and answers