Remote Control; Auto Restart Function; Emergency Function - Panasonic CU-UE12ZKF-3 Operating Instructions Manual

AUTO RESTART FUNCTION

The appliance is preset with auto restart function by the
manufacturer. In case of a sudden power failure the
module memorize all the setting set by user. when the
power supply is stored, the unit will start automatically
with all the previous settings saved by the memory
function.
To deactivate auto restart function, proceed as follows: 1.
1. Switch the air conditioner off and unplug from the
main supply.
2. Re-plug the unit and press emergency button.
3. Keep pressing the emergency button till you hear 4
short beeps from the unit. AUTO-RESTART function is
deactivated.
To activate the AUTO-RESTART function follow the
same process till you hear 3 short beeps.

EMERGENCY FUNCTION

In case the remote control is not functioning, please
proceed as follows:
Open and lift the front panel up to an angle that makes
emergency button within your reach:
1. One press will activate forced cooling operation.
2. Two press within 3 sec will activate forced heating
function.
3. To switch off the unit, long press the emergency
button.
4. After 30 minutes in forced operation, the air
conditioner will switch to cooling mode with set
temperature of 23°C and fan speed will be in AUTO
mode.
I-FEEL function is described later in the manual.
Note:
1. Shape and position of switches / buttons indicated here may differ from actual model, but they function is same.
2. External static pressure for all heat pump models is 0 Pa.

REMOTE CONTROL

6