Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Panasonic CU-UE12ZKF-3
Summary of Contents for Panasonic CU-UE12ZKF-3
-
Page 3: Safety Precautions
Safety Precautions WARNING Important Safety Instructions Indoor unit and outdoor unit To prevent injury or property damage or both, following instructions must be followed. Incorrect operation due to non- Unit should not be used by children and people with compliance of instructions may cause harm or damage. reduced physical sensory, mental illness, lack of knowledge &... - Page 4 Use complete power cord without joints. In situations where the usage of complete power cord without joints is not Caution possible, use and approved connection means. For example, socket and plug. Indoor unit and outdoor unit • Do not wash the indoor unit with water, benzene, thinner or any other scouring powder, it may damage the unit or cause corrosion.
-
Page 5: Names Of Parts
NAMES OF PARTS Note: Figures shown here are for explanation purpose only and may differ from actual model... - Page 6 INDOOR UNIT INDICATOR Indicator for timer, temperature and error codes. Timer operation Sleep mode This symbol appears when the unit is in operation and disappears when switched off Symbol appears during power on time (stand by). Note: Shape and position of switches / buttons indicated here may differ from actual model, but they function is same.
-
Page 7: Remote Control
REMOTE CONTROL AUTO RESTART FUNCTION The appliance is preset with auto restart function by the manufacturer. In case of a sudden power failure the module memorize all the setting set by user. when the power supply is stored, the unit will start automatically with all the previous settings saved by the memory function. - Page 8 REMOTE CONTROL Note: Display and some functions on remote control may differ from model to model.
- Page 9 REMOTE CONTROL S. No Key/Button Function To turn ON/OFF the unit To increase temperature or time setting To decrease temperature or time setting MODE To select mode of operation (AUTO/COOL/DRY/FAN/HEAT) To activate/deactivate the ECO function Long press to activate/deactivate the 8°C heating function (Not availabel in all models) TURBO To activate/deactivate the TURBO function To select fan speed AUTO/LOW/MID/HIGH...
-
Page 10: Replacement Of Batteries
REMOTE CONTROL Replacement of Batteries • Remove the battery cover from the rear of the remote control by sliding it in the direction shown by the arrow. • Put the batteries in place according to the direction as shown in the remote control •... -
Page 11: Child Lock
REMOTE CONTROL Cooling Mode Heating Mode The heating function allows the air conditioner to The cooling function allows the air conditioner to cool produce hot air. To activate the heating function (HEAT), the room and at the same time reduce the humidity in press MODE button till the symbol appears on the air. -
Page 12: Swing Function
REMOTE CONTROL TIMER MODE – TIMER ON SWING FUNCTION To automatically switch on the appliance ON-TIMER can be set only when unit is off. To set 1. Press this swing button to activate the louvers: the time of automatic switch on please follow the 1.1 Press to activate the horizontal louvers, they steps below:... - Page 13 REMOTE CONTROL MUTE FUNCTION ECO FUNCTION Appliance automatically sets operation to save energy 1. Press MUTE button to active this function, Press ECO button to active ECO function, will symbol will appear on the remote display. appear on the display. Press again to cancel. Press gain to deactivate.
-
Page 14: Self Clean Function
REMOTE CONTROL SELF CLEAN FUNCTION GENTLE WIND FUNCTION (Optional) (Optional) 1. Turn ON the unit and switch to COOL mode, long This function is available only in few heat pump press FAN and MUTE button together for 3 inverter models. seconds to activate GENTLE WIND function, symbol will appear on the display. -
Page 15: Current Status
OPERATING INSTRUCTION Any attempt to use this unit under temperature conditions beyond the specified range may cause the air conditioner protection device to start and unit may fail to operate. Therefore, ensure to use the air conditioner within the specified limits as mentioned below: In case of power cut when the units restarts after supply is restored or if the user switch the mode of operation from one mode to another, the compressor protection device is activated. -
Page 16: Maintenance
MAINTENANCE • Before cleaning ensure to shut down the unit and remove the plug from the socket. • Never flush the air conditioner with water. • Liquids (e.g., thinner or gasoline) damage the unit, so use only soft dry cloth WARNING or wet cloth dipped with neutral detergents to clean the unit. -
Page 17: Troubleshooting
TROUBLE SHOOTING... - Page 18 TROUBLE SHOOTING Error codes: In case of any error or malfunction, cause of error in form of error codes will be displayed on the indoor unit display. Error code along with their details are mentioned below: DISPOSAL GUIDELINE (EUROPEAN) This appliance contains refrigerant and other potentially hazardous materials. When disposing of this appliance, the law requires special collection and treatment.
-
Page 19: Accessory List
ACCESSORY LIST DISASSEMBLY FIGURES Indoor Unit Outdoor Unit • Replacement cord instructions, type Y attachment. If the supply cord is damaged, it must be replaced by the manufacturer or by an authorized service agent. - Page 25 <40 <40...
Need help?
Do you have a question about the CU-UE12ZKF-3 and is the answer not in the manual?
Questions and answers