Remove The I/O Board Cable - Lenovo Yoga Slim 7 Carbon Hardware Maintenance Manual

Figure 13. Remove the I/O board
Screw specifications
M2.0 x L3.5
Go to https://support.lenovo.com/partslookup
part:
I/O board

Remove the I/O board cable

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the solid-state drive (SSD) " on page 32
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Disconnect the I/O board cable from the I/O board and system board. Remove the I/O board cable.
Figure 14. Remove the I/O board cable
Go to
https://support.lenovo.com/partslookup
part:
36
Hardware Maintenance Manual
Number of screws
4
to look up the Lenovo part number of the following replacement
to look up the Lenovo part number of the following replacement