Attaching The Lens Hood; Attaching The Wrist Strap; Using The Lens Cap - Sharp Viewcam VL-NZ150U Operation Manual

Preparation
Changing to the 24-hour Time
Mode
1
After performing step 8 above, press l
or m to select "12H/24H", then press the
SET button.
2
Press l or m to select "24H", then
press the SET button.
1 H 2 4H 2
3
Press the MENU button to turn off the
menu screen.
Notes:
• The date and time, once set, are internally
recorded even when not displayed on the
screen.
• The menu screen automatically turns off if no
settings are made within five minutes.
Attaching the Lens
Hood
When recording outdoors on a sunny day or in
a location with bright lighting, attach the
supplied lens hood to the camcorder. Turn the
lens hood in the direction of the arrow to attach
it.
To remove it, turn it in the opposite direction.
Notes:
• The lens cap can still be attached on top of the
lens hood.
• Filters and other accessories cannot be attached
on the top of the lens hood.
17
C L O C K S E T
D I S P L A Y
S E T T I NG
1 2 H 2 4 H /
1 2 H
R E T UR N
2 4 H
2 4H
Attaching the Wrist
Strap
Attach the wrist strap to the wrist strap loop as
shown below.
Caution:
• Do not swing the camcorder by the strap.

Using the Lens Cap

Attach the strap to the lens cap as shown
below.
Attach the strap of the lens cap to the wrist
strap as shown below.
Wrist strap loop