Performing A Pre-Installation Configuration - Cisco Aironet 1830 Series Getting Started Manual

8

Performing a Pre-Installation Configuration

For a Cisco Mobility Express deployment, see the Cisco Mobility Express User Guide at this URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_Guid
e.html
The following procedures ensure that your access point installation and initial operation go as
expected. This procedure is optional.
Performing a pre-installation configuration is an optional procedure. If your network
Note
controller is properly configured, you can install your access point in its final location and
connect it to the network from there. See the
Network" section on page 20
The pre-installation configuration setup is illustrated in
"Deploying the Access Point on the Wireless
for details.
Figure 3.
11