Sharp SD-HX500 Operation Manual page 66

Connecting other equipment (continued)
SD-HX500
ENGLISH
Turn off the other equipment before making this connection.
An optical digital cable and audio cable are not supplied.
Main unit
Optical digital cable
(commercially available)
Digital audio
To optical digital
audio input jack
E-61
Amplifier unit
Audio cable
(commercially
available)
(with a built-in
recorder, etc
To audio input jack
! Digital connection to a digital audio
recorder, etc.
You can record sound on a digital audio recorder by connecting to the digital audio
output jack using an optical digital cable.
When connecting a digital audio recorder to the digital audio output jack, set
" DIGITAL" to "D-PCM" (see page 42).
BITSTREAM
D-PCM
To record sound on a digital audio recorder:
Turn the power on and press the
Notes:
" Some discs are copy protected and digital recording is not possible (including DTS
signals).
" The digital audio output jack sends signals coming from a DVD/CD, the digital
audio TV input jack, and digital audio input jack. Signals from the tuner, audio TV
input jacks, audio VCR input jacks and audio auxiliary input jacks are not sent.
" When you play DVD-Video discs with Linear PCM sound recorded at a 96 kHz
sampling rate, sound may be sampled at 96 kHz (or 48 kHz depending on the
disc).
" The digital audio output jack does not send signals coming from SACD disc.
" In DVD-Audio playback, the digital audio output jack does not send some
signals. Also, the sampling rate of digital audio signals may reduce or no
signals may be sent.
Subwoofer
" Plug in each cable fully to prevent noise interference.
amplifier)
! Using other subwoofer
You can connect a subwoofer with an amplifier to the subwoofer pre output jack.
Note:
No sound is heard from the speaker in which an amplifier is not built in.
For 5.1 channel Dolby Digital/DTS surround processors, etc.
For 2 channel digital input amplifiers, etc.
button.