To Change The Angle; To Zoom Images (Zoom) - Sharp SD-HX500 Operation Manual

! To change the angle

You can change the angle of view when playing a DVD disc that contains scenes
recorded from multiple angles.
1
When "ANGLE" appears on the unit
display during playback, set the
MODE 1/MODE 2 switch to MODE 2
and press the ANGLE button.
2
Use the ANGLE button to select an
angle number.
Each time you press, the angle changes.
Notes:
" Some DVDs prohibit changing the angle.
" The angle number is not displayed if there is no other angle recorded. "XX" is dis-
played instead.
" Refer to the manual of the disc as the operation may vary depending on the disc.

! To zoom images (zoom)

You can magnify images during playback.
1
In the pause mode or during play-
back, set the MODE 1/MODE 2
switch to MODE 2 and press the
ZOOM button.
Pressing the button cycles through the zoom settings as follows:
ZOOM: 1 ( 1.2)
out.).
2
To shift the view and display the desired part of a zoomed image,
press the , ,
1
To return to normal view:
Press the ZOOM button repeatedly to select "Off" (the indicator goes out).
When you cancel the zoom function, you cannot shift the view.
Notes:
2
" An image may become distorted when zoomed.
" Subtitles cannot be zoomed.
" When the zoom indicator changes from white to red while shifting the image, you
cannot shift it any further.
ZOOM indicator
ZOOM: 2 ( 1.5) ZOOM: 3 ( 2.0) Off (The indicator goes
or button repeatedly.
SD-HX500
ENGLISH
ZOOM : 1
E-26