Listening To The Memorized Station - Sharp SD-HX500 Operation Manual

Listening to the memorized station (continued)
SD-HX500
ENGLISH
" How to enter characters
! Use the character input buttons (0 - 9). Press repeatedly to change the character.
! To move the cursor, press the
Character input Available charac-
button ters
0 SPACE -
1
ABC 2
DEF 3
GHI 4
Example: Entering "HIT FM"
1 Press the "4" button twice.
2 Press the cursor ( ) button to move by one character.
3 Press the "4" button three times.
4 Press the "8" button.
5 Press the "0" button twice.
6 Press the "3" button three times.
7 Press the "6" button.
Deleting characters
Select a character with the
Adding characters
Select a character with the
The character at the cursor moves right by 1 character.
E-37
or button.
Character input Available charac-
button ters
JKL 5
MNO 6
PQRS 7
TUV 8
WXYZ 9
or button and press the CLEAR button.
or button and enter characters.
To recall a memorized station:
Press the TUNER PRESET ( or ) button to
select the desired station.
To select a preset station with the direct number buttons:
1 Press the corresponding number ("0" - "9").
2 Press the ENTER button.
For example, to choose 28
1 Press the "2" button.
2 Press the "8" button.
3 Press the ENTER button.
! Press buttons within 5 seconds.
! To correct, enter the number again.
To name or rename stored stations:
Start over from step 1.
To erase all the contents of the preset memory:
1 Hold the CLEAR button down for 4 seconds or
more.
2 Within 10 seconds, press the ENTER button.
(H)
Note:
The backup function protects the memorized stations for about 10 days should there
be a power failure or the AC power cord disconnection.
(I)
To change the display on the main unit:
(T)
Set the MODE 1/MODE 2 switch to MODE 1 and press the DISPLAY button.
( ) The display changes about every 4 seconds.
Memory number
(F)
(M)
(*) Names do not appear if stations are not named.
Preset channel number
Station frequency Name (*)