Warning; This Appliance Must Be Earthed; Important; Fitting A Different Plug - Beko DS1054B Manual

Warning

This appliance must be
earthed
If the fitted moulded plug is not suitable
for your socket, then the plug should
be cut off and an appropriate plug
fitted.
Destroy the old plug, which is cut off as
a plug with a bared cord could cause a
shock hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this appliance
incorporates a 13A fuse. Should the
fuse need to be replaced an ASTA
approved BS1362 fuse of the same
rating must be used. Do not forget
to refit the fuse cover. In the event of
losing the fuse cover, the plug must
not be used until a replacement fuse
cover has been fitted. Colour of the
replacement fuse cover must be the
same colour as that visible on the
pin face of the plug. Fuse covers are
available from any good electrical
store.

Important

Fitting a different plug

As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals on your plug,
proceed as follows:
1.
Connect the green - yellow or
green (earth) wire to the terminal
in the plug marked 'E' or with the
symbol
and yellow or green.
2. Connect the blue (neutral) wire to
the terminal in the plug marked 'N'
or coloured black.
3. Connect the brown (live) wire to
the terminal in the plug marked 'L'
or coloured red.
With the alternative plugs a 13A fuse
must be fitted either in the plug or
adaptor or in the main fuse box. If in
doubt contact a qualified electrician.
Green and yellow
or green
N
Blue or
black
8 GB
or coloured green
L
Brown or red