Table of Contents
Advertisement
Using two-in-one detergent:
detergent and softening salt
•
These detergents do not contain
rinse aid so you need to use the
rinse aid setting as described
in the manual, making sure that
there is rinse aid in the rinse
aid dispenser with every wash
and that you refill the rinse aid
dispenser with rinse aid every time
it is empty.
Using two-in-one detergent and
rinse aid
•
These detergents will not give you
the same drying performance that
you can obtain by using separate
detergent, salt and rinse aid. To
increase the drying performance:
•
Put your appliance's rinse aid
setting at "1" and apply rinse aid.
When the rinse aid is used up,
add more rinse aid to the rinse aid
dispenser.
•
If you use combined detergents
with a rinse aid setting higher
than 1, hand contact may leave
rainbow-coloured water stains on
the washed items and inside the
machine.
•
These detergents do not contain
softening salt so you need to use
the softening setting as described
in the manual, making sure that
there is salt in the water softener
with every wash and that you refill
the water softener with salt every
time it is empty.
Important warning
Should you encounter a problem that
has previously never occured after you
start using these detergents, contact
the detergent manufacturer directly.
You will find contact details on the
packet.
If you stop using this kind of
detergent:
•
Ensure that the salt and rinse aid
dispensers are full.
•
Put the water hardness setting at
the highest level and run a wash
cycle with the appliance empty.
After washing while empty, return
•
the water hardness setting to the
correct level for your mains water
hardness shown in the manual.
•
Put the rinse aid setting at the
correct level.
15 GB
Advertisement
Table of Contents
