How To Use; Water Hardness & Regeneration Settings - Beko DS1054B Manual

m m
1 5
5

How to use

Water hardness & regeneration settings
The dishwasher requires lime free water. Hard water leaves watermarks on your
dishes. Your dishwasher has a special water softening system to remove the
hardness of the tap water. Setting this system correctly will increase the washing
effectiveness.
To find out the water hardness level of water in your area, contact your local
Water Board or Determine water hardness level by the help of test strip provided.
If you move to a different location, the level of water hardness
will possibly be different. It is essential to reset the water
hardness in order to obtain optimum washing efficiency.
Test Strip
a
b
Remove the Let the water
test strip from flow from your
its packing. tap for 1 minute.
c
d
1 second
Take the test strip
Fill a glass with
tap water and out of the water and
dip the test strip
shake it.
into water for 1
second.
e
f
Level 1
Level 2
Level 3
Level 4
1 minute
Level 5
Level 6
Hold for Set the water hardness level of your dishwasher
1 minute. according to the result shown by the test strip.
11 GB
Make sure your
dishwasher is
perfectly level using
the adjustable feet.
When the appliance
is correctly levelled,
the door will not
catch on the inner
liner on either side
of the cabinet.
If the door does
not close correctly,
loosen or tighten
the adjustable feet,
until the machine is
perfectly level.
No Lime
Very low lime content
Low lime content
Medium lime content
High lime content
Very High lime content