Sony WEGA KLV-20SR3 Operating Instructions Manual page 23

5
The Auto Tuning menu appears on the screen. Press the OK
button to select Yes.
6
The TV starts to automatically search and store all
available broadcast channels for you.
This procedure could take some minutes. Please be patient
and do not press any buttons, otherwise automatic tuning
will not be completed.
If no channels were found during the auto tune process, a
message appears automatically on the screen asking you to
connect the aerial. Check the aerial connection (refer to
page 20). Press the OK button to restart the auto tuning
process.
7
After all available channels are captured and stored,
the Programme Sorting menu automatically appears
on the screen enabling you to change the order in
which the channels are stored.
a)
If you wish to keep the broadcast channels in the tuned order,
go to step 8.
b)
If you wish to store the channels in a different order:
v V
Press the or
1
number with the channel (TV Broadcast) you wish
to move. Press the
v V
Press the or
2
programme number position for your selected channel
(TV Broadcast). Press the OK button to store
The selected channel now moves to its new
programme position and the other channels move
accordingly.
Repeat steps b)1 and b)2 if you wish to change
3
the order of the other channels.
8
Press the MENU button to remove the menu from the screen
Your TV set is now ready for use
button to select the programme
b
button.
button to select the new
Do you want to start
automatic tuning?
Yes No
Auto tuning
Programmes found:
No channel found.
Please connect aerial
Confirm
Programme Sorting
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58
07 S02
08 S06
09 C44
10 C47
11 C48
Exit:
MENU
Programme Sorting
01 TVE
02 TVE2
03 TV3
C33
04
01 TVE
05 C27
06 C58
07 S02
08 S06
C44
09
10 C47
11 C48
Exit:
MENU
23
First Time Operation
GB