Sharp 28KF-84H Operation Manual page 24

Select «NORMALISE» and press the MENU button
audio levels to default factory settings.
7. Press the Cursor DOWN button
«LOUDSPEAKERS» (Mode), «HEADPHONES» (Mode), «EFFECTS»
and «SOUND IDENTIFICATION».
8. Press the Cursor UP / DOWN buttons
«LOUDSPEAKERS» or «HEADPHONES».
9. Press the Cursor LEFT / RIGHT buttons
sound mode, as indicated on page 21, in the -Sound Mode
Selector- chapter.
Select «EFFECTS» and press the Cursor LEFT / RIGHT buttons
/
to activate (ON) or deactivate (OFF) the spatial effect [ ].
«SOUND IDENTIFICATION»
Select «SOUND IDENTIFICATION» and press the Cursor LEFT /
/
RIGHT buttons to activate (ON) or deactivate (OFF) the auto-
matic Identification of audio system of the current program [ ].
10. Press the MENU button
«EFFECTS»
EFFECT OFF: Normal sound without sound effect.
EFFECT ON: the spatial effect depends on whether the feed is MONO or STEREO.
If the source feed is MONO, it produces a "Pseudo Stereo" effect.
If the source feed is STEREO, it produces a spatial effect, expanding the stereophonic image.
«SOUND IDENTIFICATION»
IDENTIFICATION ON: The TV automatically identifies the received audio system MONO FM, STEREO or DUAL
SIGNAL.
IDENTIFICATION OFF: Disqualifies the automatic identification of the audio system and forces the sound into
MONO FM. This mode can be convenient when the level of the signal received is extremely weak. This function is
independent for every program.
Note: the audio «EFFECTS» do not work with headphones.
«NORMALISE»
to see more options:
CH
SOUND MODE
/
CH CH
/
to change the
«EFFECTS»
to close the Menu.
«NORMALISE»
to normalise
SOUND MODE
to select:
LOUDSPEAKERS
«EFFECTS»
IDENTIFICATION
«SOUND IDENTIFICATION»
IDENTIFICATION
23
VOLUME
LOUDSPEAKERS
EQUALIZER
LOUDNESS
BALANCE
NORMALISE
Press the MENU
button to
normalise...
STEREO
HEADPHONES
EFFECTS
HEADPHONES
EFFECTS
OFF
SOUND
EFFECTS
SOUND
ON