Tv Operation (Channel Selection) - Sharp 28KF-84H Operation Manual

TV Operation
Channel Selection
Channel selector CH ù /CH Ù buttons
Select the programme channel number you want to see, using the
channel selector buttons (
CH
As you press these buttons a list of channels appears.
/
Press the again to select another channel.
CH CH
Note:
The channels that are in SKIP mode cannot be seen with
these buttons. Use numerical buttons to display these
channels.
Single/Double entry selector
This button selects between one or two digit channel number entry.
0~9 Digit buttons
You can select channels by pressing the 0 ~ 9 digit buttons on the remote control.
For single and double-digit entry see section B above.
Flashback button
Press this button to switch the currently viewed channel to the previously viewed channel, and vice versa.
This function is only available in programme channel selection mode.
I.e. not when AV terminals are in use.
/
).
CH
PR *
Single digit
entry mode
PR 01
Previously
viewed channel
Press
Double digit
entry mode
Press
Currently
viewed channel
14
Pr 01
Pr 02
Pr 03
Pr 04
Pr 05
Pr 06
Pr 07
Pr 08
Pr 09
Pr 10
PR * *
PR 12