Before You Call For Service - Sharp MICROWAVE DRAWER SMD2489ES Operation Manual

Please check the following before calling for service. It may save you time and expense.
PROBLEM
1 Part or all of Sharp
Microwave Drawer
™
Oven does not
operate.
2 Food in Sharp
Microwave Drawer
™
Oven is not heated.
3 Sharp Microwave
Drawer Oven light
™
does not work.
4 Touch controls will
not operate.
5 Display flashes.
6 Steam from the vent
POSSIBLE CAUSE
• Power cord is not completely connected to the
electrical outlet.
• Power outage.
• Fuse/circuit breaker at home doesn't work.
• Oven is in Demo Mode.
• No power to the appliance.
• Drawer controls improperly set.
• Drawer is in Demo Mode.
• Light bulb is loose or burned out.
• Control Lock is on.
• Power failure.
• During microwaving, steam may come from
the left side of the vent (when facing the
microwave).

BEFORE YOU CALL FOR SERVICE

• Make sure the power cord is tightly connected
to the outlet.
• Check house lights to be sure. Call your local
electric company for service.
• Replace the fuse or reset the circuit breaker.
• See page 22.
• See SOLUTION for PROBLEM 1.
• Check if the controls have been properly set.
• See page 22.
• Call for service.
• See page 22.
• Touch the STOP/CLEAR pad and reset the
clock. If the oven was in use, you must reset
the cooking function.
• This is normal.
25
SOLUTION