BEFORE YOU CALL FOR SERVICE
Please check the following before calling for service. It may save you time and expense.
PROBLEM
Part or all of oven does
1
not operate.
Food in oven is not
2
heated.
Oven light does not
3
work.
Touch controls will not
4
operate.
Display flashes.
5
SHARP ELECTRONICS CORPORATION • 1 Sharp Plaza, Suite 1 • Mahwah, New Jersey 07495-1123 • USA
SHARP ELECTRONICS OF CANADA LTD • 335 Britannia Road East • Mississauga, Ontario • L4Z 1W9 • Canada
E
POSSIBLE CAUSE
• Power cord of oven is not completely con-
nected to the electrical outlet.
• Power outage.
• Fuse/circuit breaker at home doesn't work.
• Oven is in Demo Mode.
• No power to the appliance.
• Oven controls improperly set.
• Oven is in Demo Mode.
• Light bulb is loose or burned out.
• Control Lock is on.
• Power failure.
• Make sure the power cord is tightly connected
to the outlet.
• Check house lights to be sure. Call your local
electric company for service.
• Replace the fuse or reset the circuit breaker.
• See page 23 for how to cancel Demo Mode.
• See SOLUTION for PROBLEM 1.
• Check if the controls have been properly set.
• See page 23.
• Call for service.
• See page 23 to unlock.
• Press Clear pad and reset the clock. If the oven
was in use, you must reset the cooking function.
26
SOLUTION