Setting Route Options; Map Settings - Blaupunkt 640 Series Operating Instructions Manual

Setting route options

In the route options, the vehicle type, type of route
(quick, short, dynamic) and additional parameters are
defined which are required by the device to calculate the
route according to your requirements.
You define the route options during the initial configura-
tion of the navigation, but you can change them for any
route guidance.
Adjusting route options before the route guidance
u Call up the navigation menu.
u Press [ More... ].
u Press [ Settings ].
The settings menu for the navigation is displayed.
u Press on the [
] button to display the second page.
u Press [ Route Settings ].
The route settings are displayed.
u Change the settings, if necessary.
u Press [ Back ] repeatedly until the navigation menu
is displayed again.
Changing route options during route guidance
u During a route guidance, press the [ More ] button.
u Press [ Route Settings ].
The route settings are displayed.
u Change the settings, if necessary.
u Press [ Back ].
The route guidance is displayed again.

Map Settings

With the map settings, you can adjust the view mode
(2D or 3D), the viewing angle of the map, the colours and
the display of buildings and points of orientation on the
map. In addition, you can specify for categories of points
of interest whether they should be displayed on the map,
e.g. car dealerships, cafés, restaurants.
u Call up the navigation menu.
u Press [ More... ].
u Press [ Settings ].
The settings menu for the navigation is displayed.
u Press on the [
] button to display the second page.
u Press [ Map Settings ].
Navigation
11