External Audio/Video Sources; Av-In Socket; Video Input; External Monitor - Blaupunkt 530 Series Operating Instructions Manual

External audio/video sources | External monitor | Sound settings

External audio/video sources

AV-IN socket

This device features an external AV input for audio and
video playback. The AV-IN socket is located under the
cover at the front of the device.
Danger!
Increased risk of injury from connector.
In case of an accident, the protruding connec-
tor in the AV-IN socket may cause injuries. The use of
straight plugs or adapters leads to an increased risk of
injury.
u Start the AV-IN mode with the button [ AV-IN ].
The display shows the audio or video playback of the
AV source.

Video input

This device features a video input at the rear of the device
for connecting a camera that is available as an option. If a
camera is connected, you can display the camera image.
u In the main menu, press the [ Camera ] button.
18

External monitor

This device features an output for connecting an external
monitor for the rear area of the vehicle (see Connection
diagram at the end of these instructions).
u Select the desired source via the main menu and
start the fi lm playback, e.g. from a DVD.
The fi lm is displayed on the monitor of the device.
u Call up the main menu.
u Press the [
] button.
The fi lm is also displayed on the external monitor.

Sound settings

Volume distribution (fader/balance)

You can adjust the volume distribution in the vehicle
for all sources.
u In the main menu or on the control bar of the current
audio source, press the [
The equalizer menu is displayed.
u Press the [
] button.
The menu for fader and balance is displayed.
u Adjust fader and balance with [
[ ] / [ ].
u Next, press [
].
The setting is stored, the current source is displayed
again.
] button.
] / [ ] or