Table of Contents
Advertisement
SCHEDULE/ADVANCE DAY key
The SCHEDULE is a seven day daily schedule that al-
lows one start/stop time per day. The schedule can be
programmed Monday through Sunday with an alternate
holiday schedule available. If no start/stop times are pro-
grammed, the unit will run on demand, providing the
chiller is not shut off on a unit or system shutdown. The
daily schedule is considered "not programmed" when
the times in the schedule are all zeros (00:00 AM).
To set the schedule, press the SCHEDULE/ADVANCE
DAY key. The display will immediately show the follow-
ing display.
M O N
S T A R T
S T O P
The line under the 0 is the cursor. If the value is wrong,
it may be changed by using the UP and DOWN arrow
keys until correct. Pressing the ENTER/ADV key will
enter the times and then move the cursor to the minute
box. The operation is then repeated if necessary. This
process may be followed until the hour, minutes, and
meridian (AM or PM) of both the START and STOP
points are set. After changing the meridian of the stop
time, pressing the ENTER/ADV key will advance the
schedule to the next day.
Whenever the daily schedule is changed
for Monday, all the other days will
change to the new Monday schedule.
This means if the Monday times are not
applicable for the whole week then the
exceptional days would need to be re-
programmed to the desired schedule.
YORK INTERNATIONAL
=
0 0 : 0 0
A M
=
0 0 : 0 0
A M
To page to a specific day press the SCHEDULE/AD-
VANCE DAY key. The start and stop time of each day
may be programmed differently using the UP and
DOWN arrow, and ENTER/ADV keys.
After SUN (Sunday) schedule appears on the display a
subsequent press of the SCHEDULE/ADVANCE DAY
key will display the Holiday schedule. This is a two part
display. The first reads:
H O L
S T A R T
S T O P
The times may be set using the same procedure as
described above for the days of the week. After chang-
ing the meridian of the stop time, pressing the ENTER/
ADV key will advance the schedule to the following dis-
play:
S _ M
T
W
H O L I D A Y
The line below the empty space next to the S is the
cursor and will move to the next empty space when the
ENTER/ADV key is pressed. To set the Holiday, the cur-
sor is moved to the space following the day of the week
of the holiday and the UP arrow key is pressed. An * will
appear in the space signifying that day as a holiday. The
* can be removed by pressing the DOWN arrow key.
The Holiday schedule must be programmed weekly-
once the holiday schedule runs , it will revert to the
normal daily schedule.
FORM 150.62-NM2
=
0 0 : 0 0
A M
=
0 0 : 0 0
A M
T
F
S
N O T E D
B Y
*
71
2
Advertisement
Table of Contents
