Daily Use - Atag VA55312BT User Manual

12
2. Put 1 litre of water in the salt container
(Only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap of the salt container
clockwise to close the salt container.
CAUTION! Water and salt can
come out of the salt container
when you fill it. After you fill the
salt container, immediately
start a programme to prevent
corrosion.

DAILY USE

1. Open the water tap.
2. Press the on/off button to activate the
appliance.
How to fill the rinse aid
dispenser
CAUTION! Only use rinse aid
specifically designed for
dishwashers.
1. Open the lid (C).
2. Fill the dispenser (B) until the rinse aid
reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the lid
locks into position.
Fill the rinse aid dispenser
when the indicator (A)
becomes clear.
If you use multi-tablets and the
drying performance is
satisfactory, the rinse aid refill
indication can be disabled.
We recommend to always use
rinse aid for better drying
performance, also in
combination with multi-tablets
containing rinsing agent.
Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the salt
container.
A B
C