TEFAL GC722834 Instructions For Use Manual page 10

3
Cooking
19
21
Successive cookings
If you want to cook a second batch of food, please set in temperature the appliance again (see section 2.
"Pre-heating", starting from point 9) even if you want to cook the same type of food or same program.
How to cook another batch of food:
After finishing ywour first batch of food:
1. Make sure the appliance is closed with no food inside.
2. Select the appropriate cooking mode/program (this step is necessary even if you decide to pick the
same cooking mode than for the previous batch of food).
3. Press the "OK" button: the appliance starts pre-heating. The pre-heating is symbolized by the cooking
level indicator that flashes purple.
4. The pre-heating is complete when an audible beep is heard and the cooking level indicator stops
flashing purple.
5. After the pre-heating, the appliance is ready for use. Open the grill and place the food inside the
appliance.
Important:
- Please note that preheating is required for each new cooking of food.
Reminder: before activating preheating, make sure that the appliance is closed and no remnants of
food remain inside.
- Then wait for preheating to finish before opening the grill and placing food inside.
Note: if the new pre-heating cycle is activated immediately after the end of the preceding cycle, the
pre-heating time will be reduced.
10
19-20 When the color corresponding to
your choice of cooking level appears
and that the beep sounds, open the
appliance and remove your food.
21 Close the appliance. The control panel
will light up and set itself to 'choice of
program' mode.
Comment: the security system will
20
turn off automatically if no program
selection is made.