Table of Contents
Advertisement
FBIR Series | Surveillance Cameras
1.3 Adjusting the camera angle
1. Use screwdriver found in accessories bag to loosen screw.
2. Adjust the camera and set its monitoring direction as required.
3. Tighten screw(s) until firmly secured.
1.4 Waterproofing the camera
1. Install the rubber ring into the network port, keeping the smaller hole of the rubber ring facing
outwards and fixing the rubber ring onto the main body of the waterproof cable.
2. Pull the network cable (without the crystal head) through the main body of the waterproof
connector. Fix the rubber ring and waterproof locking cover, attach the crystal head of network
cable, and insert it into the network cable.
3. Put the main body of the waterproof connector on the network port and rotate it clockwise to
lock the network port and waterproof connector firmly.
4. Put the waterproof cover on the main body of the waterproof connector and rotate it clockwise
to lock them firmly together.
7
www.vip-vision.com
Advertisement
Table of Contents
