Table of Contents
Advertisement
FBIR Series | Surveillance Cameras
Here we will walk you through the installation process of your "FBIR Series" camera. We will show
you how to set up and adjust your camera, insert your microSD card, waterproof your network cable
and setup your alarm. Be sure to check the Pre-install Information to have an understanding of the
included components, dimensions, and connection ports.
2.1 Position the camera
1. Install the microSD card. (Optional, see 1.2 Accessing the microSD card slot).
2. Position the installation map to a wall or ceiling and drill holes where marked.
3. Insert the expansion bolts into the drilled holes.
4. Tighten locking screws to fix the camera to the surface.
5. Plug in the external cables according to usage requirements.
6. Adjust monitoring direction of the device (See 1.3 Adjusting the camera angle).
7. Apply waterproofing to network cable (See 1.4 Waterproofing the camera).
8. Setup your alarm system (See 1.5 Alarm setup).
9. Setup is complete!
2. Camera Installation
5
www.vip-vision.com
Advertisement
Table of Contents
