Atom 580 Operator Owner's Manual

Professional lawn edgers

Advertisement

INTERNATIONAL GOLD MEDALS
AWARD WINNING LAWN EDGERS
PROFESSIONAL LAWN EDGERS
2 and 4 Stroke Engines
Safety Precautions
Operating and Edging Instructions
Important Manual - Do Not Throw Away
Manual always to be available for reference or
instructing new operators.
Introduction: Gasoline Lawn Edger
This Atom Gasoline Powered Edger is designed to the highest
standards to ensure you many hours of uninterrupted service.
Pay special attention to the safety precautions. Only persons
who understand this Manual are to operate the Edger.
To receive maximum performance and satisfaction from
your Edger, it is important that you read and understand the
maintenance and safety precautions before using the unit.
Contact your Atom dealer or the Atom distributor in your
area if you do not understand or cannot carry out any of the
operating instructions in this Manual.
Atom's philosophy is to continually improve all of its products.
As a result, engineering changes and improvements are made
from time to time. Appearances may differ between models.
This manual covers information required to operate, maintain
and service this Atom Lawn Edger.
AS WITH ANY POWER TOOL IMPROPER USE CAN CAUSE
SERIOUS INJURY. Make sure this manual is read and carefully
understood before starting or operating this equipment.
!
SafEty WarnIng
this Manual is to attract your attention to possible dangers and
deserve your careful attention and understanding. The Safety
Warnings in this Manual and on the Edger do not, by themselves,
eliminate any danger. The instructions or warnings they give are not
substitutes for proper accident prevention measures.
Failure to obey a safety warning can
!
WarnIng
result in injury to yourself and others.
Advises you of information or instructions vital
! nOtE
to the operation or maintenance of the equipment.
FIG 2
Read operators manual
atOM Lawn Edgers have australian and foreign Patents, Patent Pending, and Design registrations.
Assembling
The purpose of Safety
Warnings and Notes in
SAFETY WARNING LABELS
Wear eye protection
Do not expose motor
to moisture
Service
Contents
Safety Warning Labels ....................................... 1
Safety Precautions ........................................ 2 - 3
Assembling the Edger ......................................... 3
Parts and Controls ............................................. 4
Fuels and Oils .................................................. 4
Starting and Stopping Instructions ....................... 5
Edging Instructions ............................................ 5
Maintenance Instructions .................................... 5
Troubleshooting Tips .......................................... 6
Parts List and Parts Illustration .......................... 7- 8
The information contained in this manual is also
available at www.atomindustries.com
15m (50 feet)
Keep bystanders away
Operator / Owner Manual
Models 580 and 560
ACN 000 583 924
MADE IN AUSTRALIA
Blade cover label
63025
FIG 1
PAGE
O N L Y
Disconnet the mains
plug if the cord
is damaged or
entangled
230610

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 580 and is the answer not in the manual?

Questions and answers

Summary of Contents for Atom 580

  • Page 1: Table Of Contents

    15m (50 feet) Read operators manual Do not expose motor Keep bystanders away Blade cover label to moisture 230610 atOM Lawn Edgers have australian and foreign Patents, Patent Pending, and Design registrations.
  • Page 2: Safety Precautions

    NEVER attempt to 2.The Atom Edger. operate the Atom Edger with one hand, as a loss of control may 3.The use of the Atom Edger. result in serious or fatal injury. Make sure the handle grips are THE OPERATOR in good condition and free of moisture, oil or grease.
  • Page 3 Do not use the Atom will result. Edger with incorrect idle speed (refer Adjusting the Carburettor instructions on page 9). Store Atom Edger in a dry, high or blocked location and out of reach of children. SAFE MAINTENANCE, REPAIR AND STORING...
  • Page 4: Parts And Controls

    PARTS & CONTROLS 1+2.The handles of the edger are held by both hands. 3. The throttle interlock which releases the throttle trigger which increases the speed of the automatic safety clutch to engage and thus rotate blades. 4. Handle knob for holding handles onto housing. 5.
  • Page 5: Starting And Stopping Instructions

    (Fig. 18). Adjust blade height (Fig.15) 10. Clutch: The Atom Edger is equiped with and with new blade, try a safety clutch. DO NOT run edger if No.2 position. blade is jammed, as clutch shoes will...
  • Page 6: Maintenance Instructions

    WARRANTY allowed if damage to and nut. Tighten nut to 15-20ft.lbs. (20-27Nm) or hand are hit, ensuring long Atom unit caused by use of non genuine tight with 8” (200mm) or longer spanner. edger life. Atom parts.
  • Page 7 PROFESSIONAL EDGER PARTS LIST MODEL 560 PRO HONDA GX 35 • MODEL 570 PRO ZENOAH G34L • MODEL 580 PRO MITSUBISHI TLE33FA I SERVICE ASSEMBLIES KEY# PART# DESCRIPTION KEY# PART# DESCRIPTION 40650 SCREW M5 X 36 WE RECOMMEND FACTORY PRODUCED ASSEMBLIES...
  • Page 8 PROFESSIONAL EDGER MODELS No. 560, 570 AND 580...

This manual is also suitable for:

560

Table of Contents