Uefi Diagnostic Program; Lenovo Diagnostic Tools; The Vantage App - Lenovo ThinkCentre M70q Hardware Maintenance Manual

d. All connected devices are enabled in UEFI BIOS.
2. Use an antivirus program to see if the computer has been infected by a virus. If the program detects a
virus, remove the virus.
3. Go to "Self-help resources" on page 39 and follow the instructions for the type of problem you are
experiencing.
4. Run the diagnostic program.
5. Recover your operating system. See "Self-help resources" on page 39.
6. If the problem persists, contact Lenovo.

UEFI diagnostic program

A UEFI diagnostic program is preinstalled on the computer. It enables you to test memory modules and
internal storage devices, view system information, and check and recover bad sectors on internal storage
devices.
To run the UEFI diagnostic program, do the following:
1. Turn on the computer. If the computer cannot be turned on, go to "Basic procedure for resolving
computer problems" on page 37. If an error code is displayed, go to "Symptom-to-FRU index" on page
32 for error code descriptions and troubleshooting hints.
2. Repeatedly press and release the F10 key when turning on the computer. The main screen of the UEFI
diagnostic program is displayed.
3. Follow the instructions on the screen to use the diagnostic program.
The options on the main screen are as follows:
Table 1. Options on the main screen of the UEFI diagnostic program
DIAGNOSTICS
• CPU [U]
• DISPLAY [D]
• MEMORY [E]
• MOTHERBOARD [H]
• PCI EXPRESS [P]
• STORAGE [S]
• AUDIO [Z]
• OPTICAL [O]
• RUN ALL [R]
Note: The options on the main screen might vary, depending on the hardware configuration and the UEFI
diagnostic program version preinstalled on the computer.

Lenovo diagnostic tools

For information about Lenovo diagnostic tools, go to:
https://pcsupport.lenovo.com/lenovodiagnosticsolutions

The Vantage app

The Vantage app is preinstalled on your computer. To diagnose problems with the Vantage app:
1. Type Vantage in the Windows search box and press Enter.
38
M70q and M80q Hardware Maintenance Manual
TOOLS
• SYSTEM INFORMATION [F1]
• BAD BLOCK RECOVERY [F3]
• SMART INFORMATION [F5]