Page 6
KSOZ003 After the assembly of the upper part of the device, measure the distance between the profiles or place the construction on the gro- und and dig the hole (at least 60 cm deep). The anchors ( part number 1) should be pla-...
Page 7
KSOZ003 To prevent movement of the clamp, place a piece of a rubber be- tween the rod and the clamp.
Page 8
17. If the assembly of the device is not possible because of the technical errors (missing or missplaced holes, uneven parts), contact us on the given e-mail adress: info@k-sport-de.de . In the message include photos of defected parts.