Maintenance; Care And Cleaning - Vissani VXK320BSSE Use And Care Manual

Maintenance

REPLACING KEGS
□ Turn the kegerator/beverage cooler off and disconnect power from the wall outlet.
□
Close the main valve on the CO2 tank.
□
Close the shut-off valve on the CO2 regulator.
□
Pull the black handle on the keg coupler and press it upward to close the connection between the beer keg and the
keg coupler.
□
Pull on the tap handle(s) to help drain beer from the lines.
□
Disconnect the beer line(s) and CO2 gas line(s) from the keg coupler.
□
Put the beer lines in a bucket to drain the remaining beer from the lines.
□
Remove the beer keg(s).
□
Remove the keg coupler(s) from the keg(s).
□
Follow the steps in "Installing the keg coupler" to insert a new keg.
REPLACING THE CO2 TANK
□ Turn the kegerator/beverage cooler off and disconnect power from the wall outlet.
□
Close the main valve on the CO2 tank.
□
Close the shut-off valve on the CO2 regulator.
□
Disconnect CO2 gas line from the keg coupler.
□
Remove the CO2 tank.
□
Follow the steps in "Installing the CO2 regulator and tank" to insert a new tank.
CONVERTING YOUR BEER DISPENSER TO A BEVERAGE REFRIGERATOR
□ Follow the steps in "Replacing kegs" and "Replacing the CO2 tank."
□
Remove the draft arm assembly and pull the beer line through the top of the cabinet.
□
Replace the top cabinet plug.
□
Install the two wire shelves.
□
Adjust the temperature as desired.

Care and Cleaning

CLEANING AND MAINTENANCE
□
A regular cleaning once every two weeks of the faucet, beer hose, and keg coupler is extremely important when
the kegerator is used frequently. If this is not performed, the beer will foam. Additionally bacteria,
yeast, mold, and beer stone will build up and quickly degrade the quality of draft beer. A few minutes spent
cleaning on a regular basis will add life to your system, and improve the quality of your draft beer!
EXTERIOR CLEANING
□
The door and cabinet may be cleaned with a mild detergent and lukewarm water solution such as 2 tablespoons
of baking soda to one quart of water.
□
Do not use solvent based or abrasive cleaners.
□
Use a soft sponge and rinse with clean water.
□
Wipe with a soft clean towel to prevent water spotting.
□
If the door panel is stainless steel, it can discolor when exposed to chlorine gas and moisture.
□
Clean stainless steel with a cloth dampened with a mild detergent and warm water solution.
□
Never use an abrasive or caustic cleaning agent.
INTERIOR CLEANING
□
The kegerator's interior should be cleaned occasionally.
□
Disconnect power to the unit.
□
Open the door and remove the contents.
□
Wait until the unit defrosts.
□
With a clean cloth, wipe down the interior of the unit.
□
Reconnect power to the unit.
11
Please contact 1-855-847-7264 for further assistance.
HOMEDEPOT.COM