Advertisement
122049 Iss 2 FPM90_FPM91 English_Arabic_FP Iss3 template dual power ENG 09/11/2015 12:32 Page 15
Problem
The processor will not operate.
Compact chopper/grinder will not operate.
Blender will not operate.
Processor stops or slows
during processing.
Weighing function
Display screen freezes on [- - - -].
Weight changed on display screen.
Power On light flashing rapidly.
Power On light flashing slowly.
Auto and Power On light flashing.
Blender or compact chopper/grinder leaking
from blade assembly base.
Blender seal missing from blade unit when
removed from packaging.
Poor performance of tools/attachments.
troubleshooting guide
Cause
No Power.
No power/indicator light not lit.
Bowl not fitted to power unit correctly.
Bowl lid not locked on correctly.
Eco function operating.
Compact chopper/grinder not locked on correctly. The compact chopper/grinder will not
Compact chopper/grinder not assembled correctly. Check blade unit is fully tightened
Blender not locked on correctly.
Blender not assembled correctly.
Overload protection operated.
Processor overloaded or overheated during
operation.
Maximum capacity exceeded.
Quantity weighed too small.
Power unit moved during operation.
Normal operation.
The light will flash if the bowl, lid or blender are
not fitted to the power unit or not locked in
place correctly.
Normal operation.
Food processor left plugged in for over 30 minutes Press either the Auto Button or turn
without being operated and gone into Eco mode.
Normal operation.
The light will flash if the Auto selected but
interlocks not engaged.
Seal missing.
Seal incorrectly fitted.
Seal damaged.
The seal is packed pre-fitted to the blade unit.
Refer to hints in relevant "using the attachment" section. Check attachments are
assembled correctly.
15
Solution
Check processor is plugged in.
Check bowl is located correctly and
the handle is situated towards the
right hand side.
Check that the lid interlock is
located correctly into the handle
area.
The processor will not work
if the bowl and lid are fitted
incorrectly.
Press either the Auto Button or turn
speed control on, then return to 'O' to
switch off Eco function.
If none of the above check the
fuse/circuit breaker in your home.
operate if fitted incorrectly to the
interlock.
onto the compact chopper/grinder jar.
The blender will not operate if
fitted incorrectly to the interlock.
Check blade unit is fully tightened
into the goblet.
Switch off, unplug and allow the
appliance to cool down for
approximately 15 minutes.
Refer to the speed chart for maximum
capacities to process.
Use teaspoon and tablespoon
measures for very small quantities.
Do not move unit during use.
Zero the display before weighing next
ingredients.
Check interlocks are engaged
correctly.
speed control on and then return to
'O' to switch off Eco function.
Check interlocks are engaged
correctly or press the Auto button to
switch off the Auto function.
Check seal is fitted correctly and not
damaged. To obtain a replacement
seal see "service & customer care".
Unscrew goblet and check that seal
is fitted to blade unit.
To obtain a replacement seal see
"service & customer care".
Advertisement
