Table of Contents
Advertisement
FROST PRECAUTIONS
If the appliance is installed in an area where the
temperature can be less than 0° C, remove the
remaining water from the inlet hose and the drain
pump.
1. Disconnect the mains plug from the mains
socket.
2. Close the water tap.
3. Put the two ends of the inlet hose in a
container and let the water flow out of the
hose.
4. Empty the drain pump. Refer to the emergency
drain procedure.
CONSUMPTION VALUES
INTRODUCTION
See the web link www.theenergylabel.eu for detailed information about Energy Label.
The QR code on the energy label supplied with the appliance provides a web link to the infor-
mation related to the performance of the appliance in the EU EPREL database. Keep the en-
ergy label for reference together with the user manual and all other documents provided with
this appliance.
It is also possible to find the same information in EPREL using the link https://
eprel.ec.europa.eu and the model name and product number that you find on the rating
plate of the appliance. Refer to 'Product description' chapter for the position of the rating
plate.
LEGEND
kg
Laundry load.
kWh
Energy consumption.
Litres
Water consumption.
24
20°
5. When the drain pump is empty, install the inlet
hose again.
WARNING! Make sure that the
temperature is higher than 0 °C before
you use the appliance again.
The manufacturer is not responsible
for damages caused by low
temperatures.
hh:m
Programme duration.
m
°C
Temperature in the laundry.
rpm
Spin speed.
45°
Advertisement
Table of Contents
