Advertisement
Connect the telephone line cord (For MFC models)
4
If you do not plan to use the fax feature on this machine, go to step
The telephone line cord is not included in the box.
Connect your computer or mobile device to your machine
5
Follow these steps to complete the setup using one of the connection types available on your machine.
Visit
setup.brother.com
to download and install
Brother software.
setup.brother.com
Can't Connect? Check the following:
Wireless network
Wired network
USB connection
Manual wireless setup (Wireless models)
6
If the wireless setup is not successful, try to set up the connection manually.
Find your SSID (Network Name) and
Network Key (Password) on your wireless
access point/router and write them in the
table provided below.
SSID
(Network Name)
Network Key
(Password)
SSID: XXXXXXX
Network Key: XXXX
If you cannot find this information, ask
your network administrator or wireless
access point/router manufacturer.
For detailed machine information and product specifications, see the Online User's Guide at www.95105369.com.
.
Follow the on-screen instructions
and prompts.
Restart your wireless access point/
router (if possible).
Disconnect the cable.
„ For LCD models
Press Menu, and then select
[Network] > [WLAN(Wi-Fi)] >
[Find Network].
Follow the LCD instructions.
„ For Touchscreen models
Press
>
[Find Wi-Fi Network].
Follow the Touchscreen instructions.
You can now print and scan using your machine.
To check for the latest firmware, visit support.brother.com/up7.
Important Notice for Network Security:
The default password to manage this machine's settings is
located on the back of the machine and marked "Pwd".
We recommend immediately changing the default password
to protect your machine from unauthorised access.
Restart your machine and
computer, and then go to
.
Select the SSID (Network Name) for your
access point/router and enter the Network
Key (Password).
• For LCD models
Press and hold ▲/▼ to select one of the
following characters:
0123456789abcdefghijklmnopqrstuvwxy
zABCDEFGHIJKLMNOPQRSTUVWXY
Z(space)!"#$%&'()*+,-./:;<=>?@[\]^_'{|}~
When the wireless setup is successful,
the Touchscreen/LCD displays
[Connected].
If setup is not successful, restart your
Brother machine and your wireless
access point/router, and repeat
Setup Finished
If still not successful, go to
.
If still not successful, visit www.95105369.com
for FAQs and Troubleshooting.
Go to
software.
.
© 2023 Brother Industries, Ltd. All rights reserved.
to install
2
Advertisement
