Table of Contents
Advertisement
STEP 1
Separate and disassemble gas
system (11) and gas hose (14)
with a wrench.
STEP 3
Use 2 M5*8 screws to connect the NG
Regulator Sheet (E) and the NG Regulator
(D). Install the NG Regulator (D), Regulator
Sheet (E), and the bellows bracket (27)
with 4 M5*8 screws.
E
D
E
D
Installation and Startup | 25
STEP 2
Use a screwdriver to
seperate the pizza oven
body and disassemble it.
STEP 4
Install the NG Regulator (D), Regulator
Sheet (E), and bellows bracket (27),
connection assembly using 6pcs
1/4*14mm screws to attach to the
base of the oven dome.
D
Advertisement
Table of Contents
