Brother DCP-L5510DW Quick Setup Manual page 2

D0296N001-00
5
Select your language (if needed)
1.
On the machine's touchscreen,
press [Settings]* >
[All Settings] >
[Initial Setup] >
[Local Language].
2.
Press your language.
3.
Press .
* If your machine displays the [All Settings] menu on
the Home screen, start from [All Settings].
7
Connect your computer or mobile device to your machine
Follow these steps to complete the setup using one of the connection types available on your machine.
Visit setup.brother.com to download and install
Brother software.
setup.brother.com
Can't Connect? Check the following:
Wireless network*
Wired network
USB connection
* For certain models, the wireless network connection can be used only when the optional Wireless Module is installed.
8
Manual wireless setup (Wireless models)
If the wireless setup is not successful, try to set up the connection manually.
For certain models, the wireless network connection can be used only when the optional Wireless Module is installed.
Find your SSID (Network Name) and Network Key
(Password) on your wireless access point/router and
write them in the table provided below.
SSID (Network Name)
Network Key (Password)
SSID: XXXXXXX
Network Key: XXXX
If you cannot find this information, ask your network
administrator or wireless access point/router
manufacturer.
For detailed machine information and product specifications, see the Online User's Guide at support.brother.com/manuals.
6
Follow the on-screen
instructions and
prompts.
Restart your wireless access point/
router (if possible).
Disconnect the cable.
Press >
[Find Wi-Fi Network].
Follow the LCD instructions.
Connect the telephone line cord (For MFC models)
If you do not plan to use the fax feature on this machine, go to step
(For Europe)
We can send you a genuine Brother cord free of charge if you need one.
To contact us, visit www.brother.eu.
Setup Finished
You can now print and scan
using your machine.
To check for the latest firmware,
visit support.brother.com/up7.
Restart your machine and
computer, and then go to .
Select the SSID (Network Name)
for your access point/router and
enter the Network Key (Password).
When the wireless setup is
successful, the touchscreen
displays [Connected].
If setup is not successful, restart
your Brother machine and your
wireless access point/router,
and repeat
If still not successful, visit
support.brother.com.
Important Notice for Network Security:
The default password to manage this
machine's settings is located on the back of
the machine and marked "Pwd".
We recommend immediately changing the
default password to protect your machine from
unauthorised access.
If still not successful, go to .
If still not successful, visit support.brother.com
for FAQs and Troubleshooting.
Go to
.
© 2023 Brother Industries, Ltd. All rights reserved.
.
to install software.